I have a 06 mustang GT auto how much will it cost me to get an gear change? and where?

to be honest I don't fully understand what changing gears mean and how it works... I just read it somewhere that it would improve performanceI have a 06 mustang GT auto how much will it cost me to get an gear change? and where?
Call a trustful mobile mechanic to come over and do the gears. They will take a couplke hours to do.



Changing your gears will make a huge difference especially if you tune your vehicle to change the shift pointsI have a 06 mustang GT auto how much will it cost me to get an gear change? and where?
About a couple grand...





Go take it to Mexico...
anywhere from a several hundred to over a grand depending on if you know someone or go to an expensive shop. Find a good performance shop to get a quote. Dealers are expensive. Changing gears means changing the rear axle gears to another ratio. There are 2 gears(ring and Pinion). You can't go too far out without the engine computer needing to be modified for the lower gears. It makes your engine rev up faster and makes the car quicker. If you do not hae limited slip you can ask a shop about that. I would add it if you don't have it. That makes the wheels spin together. Ever see 2 black lines instead of one on burnouts? thats limited slip. That adds to the cost.
Ah you must be asking about the final drive gear ratio in the Rear End or what is called the 3rd member. I believe you have a 8.8'; Ring Gear and the stock ratio should be 3.55:1 for a manual transmission car. Changing the gear ratio from a 3.55:1 to a 4.10:1 or 4.33:1 or 4.56:1 will make allot of difference off the starting line, but you will sacrifice fuel mileage at cruising speed. I will cost $200 plus $111 for a shim/bearing kit, and labor to remove and install the parts. I would think that the rear end could be done at a dealership for about 4-6 hours labor at $94-100 and hour. I would say about $1000.

benefits of using

monitor upgrade drivers