Tuesday, May 31, 2011

Suzuki Katana GSX600F 93 clutch/gear change.!?

Noisy and stiff gear change.



A)... Changes gear fine when clutch cable is over tightened but I loose friction and thus reduced drive, so I am guessing there is no real issues with my transmission?

Is that a correct 1st assumption?



B)?If I slacken clutch cable (at lever) so I get good clutch engagement and no slipping, the gears CLONK and are sometimes very stiff to change. It almost breaks my heart to change it for fear of how rough it sounds whilst changing gears! clonk clonk every change!



I either get good shift %26amp;reduce torque, or good torque and stiff shift?



PN. Have changed oil/filter for as specified with no improvement.



MISC....i have located the locking nut and center screw on the engine/clutch case. But what does it do that my adjusting the cable does not do?Suzuki Katana GSX600F 93 clutch/gear change.!?
This is an internal clutch problem.Bad springs,worn clutch basket,worn friction plates or warped steel plates.I know I've answered this question before so here you go again.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.